HG connectable Dual Layer Rubber Flooring 25mm x 1m x 1m Black

Dual layer rubber floor – our heavy-duty sports floor

Heavily weighted gym sleds, countless burpees, thundering drops, tons of sweat and the ubiquitous chalk dust – gym floors do hard work every day. Thanks to its material properties, our dual layer rubber floor is up to these challenges in every situation.

The individual Dual Layers can be connected to each other with studs, so the maximum fixation can be achieved even in smaller spaces. They can also be combined with our as well as with our  and .

You can find the instructions for the stud system here BS Rubber tile installation Guide 2022

Dual layer rubber floor – resistant, easy to use, sustainable

The 25 mm thick rubber floor owes its robustness to its two-component structure. The basis is a 21 mm thick rubber granulate layer. This scores with ideal damping properties. This protects the floor from falling weights and at the same time reduces the impact sound in the gym, which makes for a much more pleasant training atmosphere.

The dual layer rubber floor is completed by a top layer of a 4 mm thick, sealed rubber granulate. The sealed top layer provides a fine, dirt-resistant and easy-to-clean training surface.

At the same time, the rubber floor is almost odorless and therefore also suitable for poorly ventilated and small training rooms. And best of all: since the rubber granulate used consists of the granulate of recycled shoe soles, the sports floor is also sustainable.

Important note: lay first, then clean

As soon as the dual layer rubber floor is installed, it should first be cleaned thoroughly. In this way, the last residues from production can be reliably removed so that the sports floor can display its material properties as quickly as possible.

Maintain dual layer rubber floor

In everyday training, the rubber floor is exposed to high loads and is constantly confronted with sweat, magnesium powder and the remains of sports drink powders. In gyms and CrossFit boxes, cleaning should be done at least once a week.

After rough cleaning with a vacuum cleaner, a cleaning cycle with a soft mop is recommended. Warm water and a gentle soap are already sufficient here. Stubborn dirt, such as stuck chewing gum, should first be removed with a scraper.

Attention: Our dual layer rubber floor should not be cleaned with alkalis, acids, aggressive chemicals as well as alcoholic and acetone-based cleaning agents.