Powder Coated Kettlebell Set Pro

Why every weight sits in the set twice

The Pro Set covers exactly the same eight steps as the Basic Set – 4, 8, 12, 16, 20, 24, 28 and 32 kg – but delivers two of each. Together that's 16 kettlebells and 288 kg. The range doesn't get wider, it gets doubled.

The first reason is the exercises that run on both sides at once: double swings, double cleans, double front rack carries, farmer walks. If the left hand holds a different weight than the right, the heavier side pulls you out of your axis – which is why those only work in a pair. The second reason is running a floor with several people, and that's why kettlebells in professional use nearly always stand there in twos: two athletes side by side on the same step, group WODs with mixed weights, personal training with two clients on one plan.

The 4 is in there twice as well. Sounds like a footnote, but in daily use it's the step where two people head into the warm-up or into mobility work at the same time.

And one more number that only applies to a paired set: there are 4 kg between the steps, but 8 kg in the total load. Going from two 12s to two 16s you add 8 kg, not 4. That's exactly why unbroken steps count for more here than in a single set – miss one pair in the middle and your next move up is twice as big.

Powder coated and cast in one piece

Every kettlebell is cast from a single piece: no welds, no glued joints, nothing that works itself loose after a few years. On top of that sits the powder coating – slightly rough, so chalk holds and the grip stays put with a wet hand. On high-rep swings that decides whether the set runs through or you have to regrip halfway.

The same powder coated bells have been in daily use in our box for years: set down on rubber flooring, shifted around, in someone's hand several times a day. What you can see on them is wear on the ball. What you won't find is a part that could come loose – there isn't one.

The ball grows with the weight

Cast iron gets its weight out of volume, so every step has its own size: 8.5 cm ball diameter on the 4, 19.5 cm on the 32, and a little more at each step in between. On the handle, 2.7 cm on the 4 stands against 3.6 to 3.8 cm on the heavy bells. That's how cast iron is built, not a question of quality.

With a paired set you feel it in both hands instead of one. Two 32s are two balls of 19.5 cm each, and in the front rack, next to your ribcage, they genuinely take up room – you set your elbows differently than with two 12s and their 13.5 cm.

Inside a pair everything stays symmetric: both bells of one step are built identically, so you never sit crooked. What changes is the jump from pair to pair – and that one lands on both sides.

With the Competition Kettlebell Set Pro the question doesn't come up at all: there every ball measures 210 mm, whatever weight sits inside. If your work asks for identical handling on every step – competition technique, mostly – that series is the better fit. For swings, cleans and carries in daily box use, the growing ball is a non-issue.

Where to put 288 kg

With 16 bells, storage belongs in the plan and not in the afterthought. A Kettlebell Storage Rack measures 126 cm across and holds around twelve bells on its two levels. Your set therefore fills one rack completely and takes up a third of a second one. Factor in both from the start, or four kettlebells end up on the floor beside them.

In paired use that pays off twice over: on the rack the two 16s stand next to each other and you pick both up in one go. Line them up along a wall instead and you need a good three metres – the widths add up to 295.4 cm, and that's with no air between the balls.